How to Get Coconut and Olive Oil Out of Carpet Faster

TheCleaningTalks.Com may earn a commission if you purchase a product through one of our links.

Carpet fibers have a tendency to absorb oily substances. In fact, many carpets tend to soak up the oil from your cooking and the food particles stuck in them. Thus, cleaning them at least once or two every year is necessary to keep them clean and fresh. But with so much oil absorbed by them, cleaning them can be a real hassle.

To remove Coconut and olive oil stains from the carpet we applied different methods on numerous carpets to check how these methods actually work. So this article provides you with the best solution for your carpet if it has an old, sticky, or stubborn oil stain.

But still, if you are in a hurry and want an instant cleaning then don’t miss to check our top recommendations for the best carpet steam cleaners and best steam cleaner for area rugs.

Steps to Get Coconut and Olive Oil Out of Carpet At Home

Things to be required for removing oil stains from carpeting.

  • How to Get Coconut and Olive Oil out of CarpetMild liquid detergent
  • Baking soda or cornstarch
  • Towel or cloth
  • Sponge
  • Soft Bristle brush
  • White vinegar
  • Dry cleaning solvent
  • Vacuum cleaner
  • Steam Cleaner (optional but recommended)

Follow the given steps to remove every type of oil stain from the rug and carpet.

  1. Dry the oil as much as possible by sprinkling some baking soda or cornstarch on the affected area. You can also use talcum powder.
  2. Take a soft bristle brush and gently use it on the surface so that the powder goes into the carpet. Let the powder for 15 minutes properly at the bottom of the carpet.
  3. Now vacuum it to suck the powder that has already absorbed the stain.
  4. Blotting the stain with a dry cleaning solvent. For this purpose, you can use either towel or a white clean cloth. Do it until the oil completely finishes from the carpet surface. If cleaning solvent is not available, you can use the mild detergent liquid. Just add 1 tablespoon of this liquid to two cups of warm water. Now add one tablespoon of ammonia.
  5. Dip the sponge into the solution, wring it, and gently rub it on the surface.
  6. Blot the surface with a towel or cloth.
  7. Finally rinse the spotted area with normal water to wash out all soapy residue, which attracts more dirt if leave damp.
  8. Or you can use a steam cleaner on the carpet after vacuuming. Its hot and high-pressure steam will not only eradicate the oil and dirt that is hidden deep inside the carpeting but also sanitize your carpet.
  9. Repeat the procedure if you see any visible spots.
  10. Let the surface air dry.

The oil stains on the carpet need quick action with great care, ignoring them for a long time will make them unsettling. These are the results that we get on carpeting after applying above mentioned techniques.

How to get Coconut and Olive Stains out of Carpet Before and After

Pro Tip
Never rub the oil stains instantly after happening. Because rubbing can push the stain deeper into the carpet fibers. Just pick it up with the help of a spatula and sprinkle cornstarch or any kind of powder to absorb the oil. And then after a few minutes brush it away.

Must check How to steam clean car seats if you own dirty car seats

How to Get Old Oil Stains Out of Carpet

Add one tablespoon of dishwashing fluid to one cup of water. Don’t use bleach or lanolin, these chemicals may cause some serious damage to the carpet. Dip a soft sponge into the solution, wring it and then apply it to the spotted area. Blot the affected place of the carpet until the oil stain no longer exists.

However, we suggest you some valuable methods to apply to the same problem.

Baking Soda OR Cornstarch to Clean Black Oil Stains From Carpet


  • Sprinkle baking soda or cornstarch on the affected area
  • Let it be for 10-15 minutes
  • Rub the stain with a piece of cloth
  • Then apply detergent with the help of a sponge
  • Brush it thoroughly
  • And finally, use a vacuum cleaner to suck all the remaining spot

Don’t rub the stain before applying baking soda or anything, it not only makes the stain larger but also pushes the oil deeper into the carpet base.

Rubbing Alcohol on Carpet

The second option, you can apply is alcohol. It simply works like a solvent.

  • Press the alcohol with a sponge to sit on the carpet and absorb the oil.
  • Leave it for some time, then dry it with a fan or air.
  • Finally, wash it with water.
  • Again dry the surface completely.

We don’t recommend using harsh chemicals, as they may worsen the situation by fainting the color of the carpet or causing any damage.

Caution: After cleaning, don’t leave the carpet wet, it increases the chance of fungus and mildew growth.
Note: The same procedure can be applied for upholstery and fabricated furniture.

Bottom Line!

It will be hard to accomplish cleaning tasks if ignoring these useful tips. Remember that removing oil from a carpet is not as easier as other cleanings, it needs special treatment and care to save your carpet from expected damage.

The best part is with these methods you can remove all types of stains whether it’s coconut, olive, or engine oil, you can get rid of all of these by using these simple techniques.


Leave a Comment